1-2. Key and Doors
Page 5
Part 1 OPERATION OF INSTRUMENTS AND CONTROLS—
Chapter 1-2 Key and Doors
- Key
- Doors
- Power window switches
- Tailgate
- Hood
- Fuel tank cap
cruisercult.com
5
Page 6
Key
The key works in every lock.
Since the doors can be locked without a key, you should always carry a spare key in case you accidentally lock your key inside the vehicle.
KEY NUMBER PLATE
Keep the key number plate in a safe place such as your wallet, not in the vehicle.
If you should lose your key or if you need additional keys, duplicates should be made by a Toyota dealer using the key number.
You should also put a copy of the key number with your important papers.
Doors — Locking with key
Turn the key towards the front of the vehicle to lock and towards the back to unlock.
LOCK
UNLOCK
FRONT
cruisercult.com
6
Page 7
- Locking with inside lock button
UNLOCK ↑ LOCK ↓
Push in the lock button to lock and pull it out to unlock.
When locked, the door cannot be opened with either the outside or inside door handle. Closing the door with the lock button pushed in will also lock the door. Be careful not to lock your key in the vehicle.
10973U01
CAUTION: Before driving, be sure that the doors are closed and locked, especially when small children are in the vehicle. Along with the proper use of seat belts, locking the doors helps prevent the driver and passengers from being thrown out from the vehicle during an accident. It also helps prevent the doors from being opened unintentionally.
- Locking with power door lock switch
DOOR LOCK
LOCK → UNLOCK ←
To lock all the side doors and tailgate simultaneously, push the switch on the "LOCK" side. Pushing on the opposite side will unlock them.
The key can be at any position.
11000T92
cruisercult.com
7
Page 8
Power window switches
UP
DOWN
WINDOW LOCK
10710103
To raise or lower the windows, use the switch on each door. The passengers' windows can also be controlled by the switches on the driver's door.
The ignition key must be in the "ON" position.
OPERATING THE DRIVER'S WINDOW
Push the center lever either way. The window glass moves as long as the lever is operated. For automatic operation, use the outer switch.
10710104
Push the outer switch down on the "AUTO" side. The window will fully open even if you let go of the switch. To stop the window partway, lightly push the center lever up.
AUTOMATICALLY DOWN
FOR DRIVER'S USE
FOR FRONT PASSENGER'S WINDOW
FOR LEFT REAR WINDOW
FOR RIGHT REAR WINDOW
UP
DOWN
FOR EACH PASSENGER'S USE
10710105
8
cruisercult.com
Page 9
OPERATING THE PASSENGERS' WINDOWS
Push the switch on either side. The window glass moves as long as the switch is operated. To lock the window at that position, push the "WINDOW LOCK" switch.
With the "WINDOW LOCK" switch pressed in, the windows cannot be raised or lowered.
CAUTION:
To avoid personal injury, observe the following.
- When small children are in the vehicle, take care not to allow them unexpected use of the switches. Use the window locking feature described above or, if you must leave them unattended, remove the key from the ignition switch.
- When closing the windows, be sure that no one has his/her head, hands or arms sticking out the window.
NOTICE:
To prevent the battery from being discharged, turn the switch on when the engine is running.
Tailgate —
LOCK
OPEN
UNLOCK
OPEN
UNLOCK
LOCK
OPEN
1070106
10850102
cruisercult.com
9
Page 10
After closing the tailgate, try pulling it up to make sure it is securely closed.
CAUTION: Keep the tailgate closed while driving. This not only keeps the luggage from being thrown out but also prevents exhaust gases from entering the vehicle.
Hood
- RELEASE AUXILIARY CATCH
- RELEASE HOOD LOCK
To open the hood, pull the hood lock release lever under the dash. The hood will spring up slightly. In front of the vehicle, press up on the auxiliary catch lever and lift the hood.
- SLOT
- SUPPORT ROD
After lifting the hood up, hold it open by inserting the support rod into the slot.
The end of the rod should be inserted into the slot in the front edge of the hood.
Before closing the hood, check to see that you have not forgotten any tools, rags, etc. and return the support rod to its clip—this prevents rattles. Then lower the hood and make sure it locks into place. If necessary, press down gently on the front edge to lock it.
CAUTION: After inserting the rod, make sure it supports the hood securely.
10
cruisercult.com
Page 11
Fuel tank cap
-
To open the fuel filler door, pull the lever out or use your key.
10920101 -
To remove the fuel tank cap, turn the cap slowly counterclockwise, then pause slightly before removing it.
10920-02
It is not unusual to hear a slight swoosh when the cap is opened. When installing, make sure the tabs in the cap are properly aligned with the cutouts in the tank opening.
CAUTION: - When opening the cap, do not remove the cap quickly. Fuel may be under pressure and spray out of the fuel filler neck under hot weather conditions, etc., which may cause injury. - Make sure that the cap is tightened securely to prevent fuel spillage in case of an accident.
- Use only a genuine Toyota fuel tank cap for replacement. It has a built-in check valve.
cruisercult.com
11
Page 12
-
12
-
cruisercult.com
